.. _files: .. index:: files ====================================================================== Files produced ====================================================================== .. contents:: Contents: :local: :depth: 3 .. _final-products: Final products -------------- .. _full-S2-tiles: .. index:: S2 tiles Orthorectified S2 tiles +++++++++++++++++++++++++++++ :Content: Complete final product: concatenated orthorectified S1 images on S2 grid :Directory: :ref:`%(output) `:samp:`/{{tilename}}/` by default :Directory format: :samp:`{{out_dir}}/{{tile_name}}`, see :ref:`[Processing].dname_fmt.tiled ` :File name: - :samp:`s1{{a|b}}_{{tilename}}_{{polarity}}_{{orbitdirection}}_{{orbitnumber}}_{{YYYYMMDD}}txxxxxx.tif` when the tile has been assembled from the concatenation of several S1 images - :samp:`s1{{a|b}}_{{tilename}}_{{polarity}}_{{orbitdirection}}_{{orbitnumber}}_{{YYYYMMDD}}t{{hhmmss}}.tif` when the tile has been produced from a single S1 image .. note:: :math:`σ^0_{RTC}` calibrated files will have their name end in :file:`_NormLim.tif` :File name format: - :samp:`{{flying_unit_code}}_{{tile_name}}_{{polarisation}}_{{orbit_direction}}_{{orbit}}_{{acquisition_stamp}}.tif`, see :ref:`[Processing].fname_fmt.concatenation ` - or, :samp:`{{flying_unit_code}}_{{tile_name}}_{{polarisation}}_{{orbit_direction}}_{{orbit}}_{{acquisition_stamp}}_NormLim.tif`, see :ref:`[Processing].fname_fmt.lia_corrected ` :Product encoding: - defaults to Float32 GeoTIFF, deflate compressed - defined in :ref:`[Processing].creation_options.tiled ` :Metadata: The following metadata is added to the origin S1 images .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``ACQUISITION_DATETIME`` - time of the first S1 image (in UTC format since v1.1) * - ``ACQUISITION_DATETIME_1`` - time of the first S1 image (in UTC format since v1.1) * - ``ACQUISITION_DATETIME_2`` - time of the second S1 image (in UTC format since v1.1) * - ``CALIBRATION`` - :ref:`chosen calibration option ` * - ``FLYING_UNIT_CODE`` - :samp:`s1{{a|b}}` * - ``IMAGE_TYPE`` - :samp:`GRD` * - ``INPUT_S1_IMAGES`` - List of the input Sentinel-1 images used to generate this product * - ``LIA_FILE`` - (when applies) name of the LIA file used for Normlim calibration * - ``NOISE_REMOVED`` - :ref:`chosen noise removal option ` * - ``ORBIT_NUMBER`` - :samp:`{{orbitNumber}}` * - ``ORBIT_DIRECTION`` - :samp:`{{orbitDirection}}` * - ``ORTHORECTIFIED`` - :samp:`true` * - ``POLARIZATION`` - :samp:`{{polarisation}}` * - ``RELATIVE_ORBIT_NUMBER`` - :samp:`{{relativeOrbitNumber}}` * - ``S2_TILE_CORRESPONDING_CODE`` - :samp:`{{tilename}}` * - ``SPATIAL_RESOLUTION`` - :ref:`chosen output spatial resolution option ` * - ``TIFFTAG_DATETIME`` - is updated with the time when the tile has been generated by S1 Tiling. * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`{{calibration}} calibrated orthorectified Sentinel-1{{A|B}} IW GRD on S2 tile` * - ``TIFFTAG_SOFTWARE`` - :samp:`S1 Tiling v{{version}}` -- |version| currently .. _mask-files: .. index:: Mask files Mask files ++++++++++ :Content: .. todo:: Thierry? :Directory: :ref:`%(output) `:samp:`/{{tilename}}/` by default :Directory format: :samp:`{{out_dir}}/{{tile_name}}`, see :ref:`[Processing].dname_fmt.mask ` :File name: the same as the one from :ref:`the S2 tiles `, with `_BorderMask` appended :Product encoding: - defaults to Byte GeoTIFF, deflate compressed - defined in :ref:`[Processing].creation_options.mask ` :Metadata: This file contains the same metadata as the one from :ref:`the S2 tile product ` it has been generated from, with the following as the only difference: .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`Orthorectified Sentinel-1A IW GRD smoothed border mask S2 tile` .. _filtered-files: .. index:: Filtered files Filtered files ++++++++++++++ :Content: .. todo:: Thierry? :Directory: :ref:`%(output) `:samp:`/filtered/{{tilename}}/` by default :Directory format: :samp:`{{out_dir}}/filtered/{{tile_name}}`, see :ref:`[Processing].dname_fmt.filtered ` :File name: the same as the one from :ref:`the S2 tiles `, with `_filtered` appended :File name format: - :samp:`{{flying_unit_code}}_{{tile_name}}_{{polarisation}}_{{orbit_direction}}_{{orbit}}_{{acquisition_stamp}}_filtered.tif`, see :ref:`[Processing].fname_fmt.filtered ` - or, :samp:`{{flying_unit_code}}_{{tile_name}}_{{polarisation}}_{{orbit_direction}}_{{orbit}}_{{acquisition_stamp}}_NormLim_filtered.tif` :Product encoding: - defaults to Float32 GeoTIFF, deflate compressed - defined in :ref:`[Processing].creation_options.filtered ` :Metadata: This file contains the same metadata as the one from :ref:`the S2 tile product ` it has been generated from, with the following as the only difference: .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``FILTERED`` - :samp:`true` * - ``FILTERING_METHOD`` - The method used: :samp:`Lee`/:samp:`Frost`/:samp:`gammamap`/:samp:`Kuan` * - ``FILTERING_WINDOW_RADIUS`` - The window radius used. * - ``FILTERING_DERAMP`` - The deramp factor used (only for Frost method) * - ``FILTERING_NBLOOKS`` - The number of looks used (only for Lee, Gammamap and Kuan methods) .. _lia-files: .. index:: Local Incidence Angle map files Local Incidence Angle map files +++++++++++++++++++++++++++++++ :Content: - Map of sines of Local Incidence Angle (LIA), - and optionally of LIA expressed in degree and scaled by a factor of 100. Given T, the target point on Earth's surface, and S the SAR sensor position, the LIA is the angle Θ\ :sub:`LIM` between the ground normal projected in range plane :math:`\overrightarrow{n}` (plane defined by S, T, and Earth's center) and :math:`\overrightarrow{TS}`. The values have been orthorectified on the Sentinel-2 tile from a pair of :ref:`LIA maps computed on S1 images `. :Directory: :ref:`%(output_lia)/ ` by default :Directory format: :samp:`{{lia_dir}}`, see :ref:`[Processing].dname_fmt.lia_product ` :File names: - :samp:`sin_LIA_s1{{a|b}}_{{tilename}}_{{orbitdirection}}_{{orbitnumber}}.tif` -- :math:`sin(Θ_{LIM})` - :samp:`LIA_s1{{a|b}}_{{tilename}}_{{orbitdirection}}_{{orbitnumber}}.tif` -- :math:`100 * Θ°_{LIM}` :File name format: :samp:`{{LIA_kind}}_{{flying_unit_code}}_{{tile_name}}_{{orbit_direction}}_{{orbit}}.tif`, see :ref:`[Processing].fname_fmt.lia_product ` :Product encoding: - defaults to Float32 (/Uint16) GeoTIFF, deflate compressed - defined in :ref:`[Processing].creation_options.lia_sin ` (/:ref:`[Processing].creation_options.lia_deg `) :Metadata: The following metadata is added to the origin S1 images .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``ACQUISITION_DATETIME`` - time of the first S1 image (in UTC format since v1.1) * - ``ACQUISITION_DATETIME_1`` - time of the first S1 image (in UTC format since v1.1) * - ``ACQUISITION_DATETIME_2`` - time of the second S1 image (in UTC format since v1.1) * - ``DATA_TYPE`` - :samp:`100 * degree(LIA)` / :samp:`SIN(LIA)` * - ``FLYING_UNIT_CODE`` - :samp:`s1{{a|b}}` * - ``IMAGE_TYPE`` - :samp:`GRD` * - ``INPUT_S1_IMAGES`` - List of the input Sentinel-1 images used to generate this product * - ``ORBIT`` - :samp:`{{orbitnumber}}` * - ``ORBIT_DIRECTION`` - :samp:`{{orbitdirection}}` * - ``ORTHORECTIFIED`` - :samp:`true` * - ``S2_TILE_CORRESPONDING_CODE`` - :samp:`{{tilename}}` * - ``SPATIAL_RESOLUTION`` - :ref:`chosen output spatial resolution option ` * - ``TIFFTAG_DATETIME`` - is updated with the time when the tile has been generated by S1 Tiling. * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`Orthorectified LIA/sin_LIA Sentinel-1A IW GRD` * - ``TIFFTAG_SOFTWARE`` - :samp:`S1 Tiling v{{version}}` -- |version| currently .. _temporary-files: .. index:: Temporary files Temporary files --------------- Before generating the final products, S1 Tiling produces temporary files. Some are removed automatically, others are :ref:`cached ` in between several runs to shorten processing times when resuming after an interruption. .. note:: It's up to you, end-user, to clean that directory regularly. .. _orthoready-files: Cut and calibrated S1 images ready for orthorectification +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: S1 images :ref:`calibrated ` and :ref:`cut `. :Directory: :ref:`%(tmp) `:samp:`/S1/` :File name: The same as the origin S1 file with ``_OrthoReady`` appended. .. note:: An accompanying OTB ``.geom`` file was also generated with OTB 7. Example: .. code-block:: none s1a-iw-grd-vv-20200108t044150-20200108t044215-030704-038506-001_sigma_OrthoReady.tiff s1a-iw-grd-vv-20200108t044150-20200108t044215-030704-038506-001_sigma_OrthoReady.geom :File name format: ``fname_fmt.cut_borders`` = :samp:`{{rootname}}_{{calibration_type}}_OrthoReady.tiff` :Product encoding: Float32 GeoTIFF, uncompressed. :Metadata: The following metadata are added at this step: .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``ACQUISITION_DATETIME`` - time of the input S1 image (in UTC format since v1.1) * - ``CALIBRATION`` - :ref:`chosen calibration option ` * - ``FLYING_UNIT_CODE`` - :samp:`s1{{a|b}}` * - ``IMAGE_TYPE`` - :samp:`GRD` * - ``INPUT_S1_IMAGES`` - Name of the input Sentinel-1 image used to generate this product * - ``NOISE_REMOVED`` - :ref:`chosen noise removal option ` * - ``ORBIT`` - :samp:`{{orbitnumber}}` * - ``ORBIT_DIRECTION`` - :samp:`{{orbitdirection}}` * - ``POLARIZATION`` - :samp:`{{polarisation}}` * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`{{calibration}} calibrated Sentinel-1{{A|B}} IW GRD` .. note:: These files can be kept as a same calibrated and cut S1 image can be orthorectified for producing several intersecting S2 tiles. .. note:: These temporary files will be produced only if :program:`S1Processor` is executed with ``--cache-before-ortho`` option. In that case, the processing will no longer be done in memory and orthoready files will be produced. You would also have to explicitly clean these temporary files. .. _orthorectified-files: Orthorectified S1 images ++++++++++++++++++++++++ :Content: Single concatenated orthorectified S1 image on S2 grid :Directory: :ref:`%(tmp) `:samp:`/S2/{{tilename}}/` :File name: :samp:`s1{{a|b}}_{{tilename}}_{{polarity}}_{{orbitdirection}}_{{orbitnumber}}_{{YYYYMMDD}}t{{hhmmss}}_{{calibration}}.tif` :File name format: ``fname_fmt.orthorectification`` = :samp:`{{flying_unit_code}}_{{tile_name}}_{{polarisation}}_{{orbit_direction}}_{{orbit}}_{{acquisition_time}}_{{calibration_type}}.tif` :Product encoding: Float32 GeoTIFF, deflate compressed :Metadata: The metadata listed for :ref:`the S2 tile product ` are actually produced at this step. .. note:: These files are automatically cleaned up. .. _dem-vrt-files: DEM VRT files +++++++++++++ :Content: Virtual aggregate of all the DEM files that fully cover the associated input S1 images (in both polarities). :Directory: :ref:`%(tmp) `:samp:`/S1/` :File name: - :samp:`DEM-s1{tilename}.tif` - or deprecated: :samp:`DEM-s1{{a|b}}-iw-grd-{{start_stamp}}-{{end_stamp}}-{{nr1}}-{{nr2}}.tif` :File name format: - ``fname_fmt.dem_s2_agglomeration`` = :samp:`DEM_{{tile_name}}.vrt` - or deprecated: ``fname_fmt.dem_s1_agglomeration`` = :samp:`DEM_{{polarless_rootname}}.vrt` :Product encoding: VRT :Metadata: No metadata is added by S1Tiling to these files. :Cleanup: These files are cleaned automatically (since new workflow from v1.1). .. _DEM_on_S2-files: DEM data projected on S2 tile +++++++++++++++++++++++++++++ :Content: DEM information projected on S2 tile according to :ref:`project_dem_to_s2-proc` :Directory: :ref:`%(tmp) `:samp:`/S2/` :File name: :samp:`DEM_projected_on_{{tilename}}.tiff` :File name format: ``fname_fmt.dem_on_s2`` = :samp:`DEM_projected_on_{{tile_name}}.tiff` :Product encoding: Float32 GeoTIFF, uncompressed. :Metadata: The following metadata are added at this step: .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``S2_TILE_CORRESPONDING_CODE`` - :samp:`{{tilename}}` * - ``SPATIAL_RESOLUTION`` - :ref:`chosen output spatial resolution option ` * - ``DEM_LIST`` - List of DEM (SRTM currently) tiles used to generate the file * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`Warped DEM to S2 tile` :Cleanup: These files are cleaned automatically. .. _height_on_S2-files: Height (DEM+Geoid) projected on S2 tile +++++++++++++++++++++++++++++++++++++++ :Content: Height information (DEM + Geoid combined) projected on S2 tile according to :ref:`project_geoid_to_s2-proc` and :ref:`Sum DEM + Geoid `. :Directory: :ref:`%(tmp) `:samp:`/S2/` :File name: :samp:`DEM+GEOID_projected_on_{{tilename}}.tiff` :File name format: ``fname_fmt.height_on_s2`` = :samp:`DEM+GEOID_projected_on_{{tile_name}}.tiff` :Product encoding: Float32 GeoTIFF, uncompressed. :Metadata: The following metadata changed from the :ref:`DEM projected on S2 tile ` .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`DEM + GEOID height info projected on S2 tile` :Cleanup: .. warning:: These files still **need** to be cleaned manually. This should change eventually, or it may be conditionned to an option. .. _ground_and_sat_S2-files: Ground and sensor position in XYZ ECEF coordinates ++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: Six bands 64 bits float image that contains ground pixel coordinates and associated sensor position coordinates expressed as XYZ cartesian pixels in `ECEF `_ spatial reference. The image footprint matches the associated S2 tile. :Directory: :ref:`%(tmp) `:samp:`/S2/` :File name: :samp:`XYZ_projected_on_{{tile_name}}_{{orbitdirection}}_{{orbitnumber}}.tif` :File name format: ``fname_fmt.ground_and_sat_s2`` = :samp:`XYZ_projected_on_{{tile_name}}_{{orbit_direction}}_{{orbit}}.tif` :Product encoding: Float64 GeoTIFF, 6 bands: XCartesian, YCartesian, ZCartesian. SensorXCartesian, SensorXCartesian, SensorZCartesian :Metadata: The following metadata changed from the :ref:`DEM+GEOID projected on S2 tile ` .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``ACQUISITION_DATETIME`` - time of the first S1 image (in UTC format since v1.1) * - ``DEM_LIST`` - List of DEM (SRTM currently) tiles used to generate the file * - ``FLYING_UNIT_CODE`` - :samp:`s1{{a|b}}` * - ``IMAGE_TYPE`` - :samp:`GRD` * - ``INPUT_S1_IMAGES`` - List of the input Sentinel-1 images used to generate this product * - ``ORBIT`` - :samp:`{{orbitnumber}}` * - ``ORBIT_DIRECTION`` - :samp:`{{orbitdirection}}` * - ``PRJ.DIRECTIONTOSCANDEMC`` - Range direction for DEM scan. * - ``PRJ.DIRECTIONTOSCANDEML`` - Azimuth direction for DEM scan. * - ``PRJ.GAIN`` - Gain value * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`XYZ ground and satellite positions on S2 tile` :Cleanup: These files are cleaned automatically. Deprecated temporary files -------------------------- .. _S1_on_dem-files: Files of S1 coordinates projected on DEM geometry (deprecated) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: Pixels are in the :ref:`Virtual DEM ` geometry. Their values contain the XYZ cartesian coordinates of the pixel and the position of the matching pixel in the original Sentinel-1 image. This file is produced with `DiapOTB SARDEMProjection `_ application. :Directory: :ref:`%(tmp) `:samp:`/S1/` :File name: :samp:`S1_on_DEM-s1{{a|b}}-iw-grd-{{start_stamp}}-{{end_stamp}}-{{nr1}}-{{nr2}}.tif` :File name format: ``fname_fmt.s1_on_dem`` = :samp:`S1_on_DEM_{{polarless_basename}}` :Product encoding: Float32 GeoTIFF, 7 bands: C (colunm into SAR image), L (line into SAR image), Z and Y, XCartesian, YCartesian, ZCartesian. :Metadata: The following metadata is added to the origin S1 images .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``ACQUISITION_DATETIME`` - time of the first S1 image (in UTC format since v1.1) * - ``DEM_LIST`` - List of DEM (SRTM currently) tiles used to generate the file * - ``FLYING_UNIT_CODE`` - :samp:`s1{{a|b}}` * - ``IMAGE_TYPE`` - :samp:`GRD` * - ``INPUT_S1_IMAGES`` - List of the input Sentinel-1 images used to generate this product * - ``ORBIT`` - :samp:`{{orbitnumber}}` * - ``ORBIT_DIRECTION`` - :samp:`{{orbitdirection}}` * - ``PRJ.DIRECTIONTOSCANDEMC`` - Range direction for DEM scan. * - ``PRJ.DIRECTIONTOSCANDEML`` - Azimuth direction for DEM scan. * - ``PRJ.GAIN`` - Gain value * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`SARDEM projection onto DEM list` :Cleanup: .. warning:: These files still **need** to be cleaned manually. This should change eventually, or it may be conditionned to an option. .. _xyz-files: Files of XYZ cartesian coordinates in S1 geometry (deprecated) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: Pixels are in the original Sentinel-1 image geometry. Their values contain the XYZ cartesian coordinates of the pixel. This file is produced with `our patched version `_ of `DiapOTB SARCartesianMeanEstimation `_ application. :Directory: :ref:`%(tmp) `:samp:`/S1/` :File name: :samp:`XYZ-s1{{a|b}}-iw-grd-{{start_stamp}}-{{end_stamp}}-{{nr1}}-{{nr2}}.tif` :File name format: ``fname_fmt.xyz`` = :samp:`XYZ_{{polarless_basename}}` :Product encoding: Float32 GeoTIFF, 4 bands: XCartesian, YCartesian, ZCartesian, and ??? :Metadata: The following metadata changed from the :ref:`SARDEMProjected images ` .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``PRJ.DIRECTIONTOSCANDEMC`` - **Removed** * - ``PRJ.DIRECTIONTOSCANDEML`` - **Removed** * - ``PRJ.GAIN`` - **Removed** * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`Cartesian XYZ coordinates estimation` :Cleanup: .. warning:: These files still **need** to be cleaned manually. This should change eventually, or it may be conditionned to an option. .. _lia-s1-files: Local Incidence Angle map files in S1 geometry (deprecated) +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: - Map of sines of Local Incidence Angle (LIA), - and optionally of LIA expressed in degree and scaled by a factor of 100. Given T, the target point on Earth's surface, and S the SAR sensor position, the LIA is the angle Θ\ :sub:`LIM` between the ground normal projected in range plane :math:`\overrightarrow{n}` (plane defined by S, T, and Earth's center) and :math:`\overrightarrow{TS}`. Unlike the :ref:`final LIA maps in S2 geometry `, the LIA map is in the geometry of the original Sentinel-1 image used to produce it. :Directory: :ref:`%(tmp) `:samp:`/S1/` :File name: - :samp:`LIA-s1{{a|b}}-iw-grd-{{start_stamp}}-{{end_stamp}}-{{nr1}}-{{nr2}}.tif` - :samp:`sin-LIA-s1{{a|b}}-iw-grd-{{start_stamp}}-{{end_stamp}}-{{nr1}}-{{nr2}}.tif` :File name format: - ``fname_fmt.s1_lia`` = :samp:`LIA_{{polarless_basename}}` - ``fname_fmt.s1_sin_lia`` = :samp:`sin_LIA_{{polarless_basename}}` :Product encoding: Float32 GeoTIFF :Metadata: The following metadata is changed the :ref:`XYZ estimated coordinates ` .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`LIA on Sentinel-1A IW GRD` :Cleanup: .. warning:: These files still **need** to be cleaned manually. This should change eventually, or it may be conditionned to an option. .. _lia-s2-half-files: Half Local Incidence Angle map files -- pre-concatenation. (deprecated) +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ :Content: - Map of sines of Local Incidence Angle (LIA), - and optionally of LIA expressed in degree and scaled by a factor of 100. These files directly match the :ref:`LIA maps computed on S1 images `, after orthorectification to the Sentinel-2 tile, and before their concatenation in the :ref:`final LIA maps in S2 geometry `. :Directory: :ref:`%(tmp) `:samp:`/S2/` :File names: - :samp:`sin_LIA_s1{{a|b}}_{{tilename}}_{{orbitdirection}}_{{orbitnumber}}_{{start_stamp}}.tif` -- :math:`sin(Θ_{LIM})` - :samp:`LIA_s1{{a|b}}_{{tilename}}_{{orbitdirection}}_{{orbitnumber}}_{{start_stamp}}.tif` -- :math:`100 * Θ°_{LIM}` :File name format: ``fname_fmt.lia_orthorectification`` = :samp:`{{LIA_kind}}_{{flying_unit_code}}_{{tile_name}}_{{orbit_direction}}_{{orbit}}_{{acquisition_time}}.tif` :Product encoding: Float32 (and Int16) GeoTIFF, deflate compressed :Metadata: The following metadata is changed from the :ref:`un-orthorectified LIA maps ` .. list-table:: :widths: auto :header-rows: 1 :stub-columns: 1 * - Metadata - Value * - ``DATA_TYPE`` - :samp:`100 * degree(LIA)` / :samp:`SIN(LIA)` * - ``ORTHORECTIFIED`` - :samp:`true` * - ``S2_TILE_CORRESPONDING_CODE`` - :samp:`{{tilename}}` * - ``SPATIAL_RESOLUTION`` - :ref:`chosen output spatial resolution option ` * - ``TIFFTAG_IMAGEDESCRIPTION`` - :samp:`Orthorectified LIA Sentinel-1A IW GRD` :Cleanup: .. warning:: These files still **need** to be cleaned manually. This should change eventually, or it may be conditionned to an option.